We're More Than Just Door Closers!!! As the manufacturers distributor, we carry the largest selection of commercial door hardware and other parts. Adjustable top pivots (female door portion), all glass door weathstripping, ball bearing hinges, center hung pivots, concealed overhead closers & parts, door handle parts, door pressure gauges, dummy arms, glass door locks, kick down door stops, reinforcing hinge plates, slide-in weatherstripping, spring hinges, strikes, and surface bolts
An Adjustable Top Pivot is the female portion of the top pivot located in the top rail of an all glass door. The pivot adjusts the door from frame to frame. Adjustable block and track assembly for easy adjustment.
Prevents drafts, light, rain, wind, dust, snow, fumes, insects, and rodents from entering. All glass door weatherstripping made for non-frame glass doors. Made for 1/2" & 3/4" Glass Doors. Select from slip-on or adhesive backed weatherstripping.
Bottom center hung adjustable pivots. The Center Hung Pivot is a pivot that is installed in the center of the door either on top or bottom of the door. Pivot point centered in thickness of door. They offer full floor-to-ceiling concealment for center hung doors. It can operate on either single acting or double acting doors. Center hung pivots are sold individually and as a set.
Door Closer Services own brand of concealed overhead closers. Our concealed overhead closers provide smooth operation at a quality price. Brass adjustment valves fully adjustable after installation. They are exact replacments for Calibre, International, Jackson, and Kawneer concealed overhead closers.
A wide variety of replacement cone head screws for door handles & pulls available. We Carry Replacement Shoulder Bolts, Thru Bolts, Decorative End Caps, Washers, Bushing, Set Screws, Rivnuts, etc.
A door pressure gauge is an instrument designed to measure the opening force of a door. They help to determine if the door meets A.D.A. Regulations. The Door Pressure Gauge is used by Building and Fire Code Inspectors, Architects and Contractors, Building Maintenance Engineers, Elevator Engineers and Door and Hardware Professionals.
Side Load, Offset, and End Load Retrofit Dummy Arms for Concealed Door Checks to Surface-Mounted, Retrofit to Surface-Mounted & Concealed Overhead Door Closers. Retrofits for Rixson, Doromatic, Pittco, Dorma, MAB, Jackson, Kawneer Husky, and Dorma.
A glass door lock is made for locking the bottoms of glass doors with a mortise cylinder. They are fixed in the bottom rails of glass doors and or patch fittings.
A doorstop (also door stopper or door stop) is an object or device used to hold a door open or closed, or to prevent a door from opening too widely. Alternatively, a doorstop can be a thin slat built inside a door frame to prevent a door from swinging through when closed.
A hinge is a type of bearing that connects two solid objects, typically allowing only a limited angle of rotation between them. Two objects connected by an ideal hinge rotate relative to each other about a fixed axis of rotation. Hinges may be made of flexible material or of moving components.
Replacement slide-in weatherstripping for aluminum glass doors. Weatherstripping seals the openings of doors, windows, and trunks to prevent rain, dirt, dust, insects, and wind from entering. A secondary goal of weatherstripping is to keep interior air in, thus saving energy with heating and air conditioning.
A strike plate is a metal plate affixed to a door jamb with a hole or holes for the bolt of the door. When the door is closed, the bolt extends into the hole in the strike plate and holds the door closed. The strike plate protects the jamb against friction from the bolt and increases security in the case of a jamb made of a softer material (such as wood) than the strike plate.
Surface Bolts are made for use on single doors, double doors, this heavy duty surface bolt has smooth, simple guides and allows one door to stay closed while the other is open.