Description

Product Description & Features:

• Spring Power: DC6200 closers: multi-sized; fully adjustable sizes 1 through 6.
• Allows inside application of closer on out-swinging doors. Closer is mounted on the push side, with the arm almost parallel to the face of the door. Arm does not project from the opening
• Handing: Non-handed (with the exception of some arms and accessories).
• Function: Non-Hold Open (NHO)
• Body: Cast-iron case with seamless cold headed steel spring tube.
• Arm: Standard forged steel.
• Spindle: Heat-treated steel with a crowned gear set for increased efficiency.
• Piston: 1-3/8″ diameter; precision machined, heat-treated steel.
• Springs: Chrome silicon wire.
• Valves: Latching speed valve standard. Closing speed valve standard. Multiple backcheck location valve and backcheck intensity valve standard.
• Seals:
•O
• rings.
• Fluid Standard: high lubricity extreme temperature hydraulic fluid.
• Degree of Opening Up to full 180
• opening standard for parallel arm mountings, conditions permitting.
• Power Adjustment Arm Bracket: 15% adjustment standard.
• Cover: Standard plastic V-O flame rated cover.
• Mountings Parallel Arm
• Mounting Bracket: Quik-Install
• mounting bracket standard.
• Fasteners: Standard: self-drilling screws.
• Corrosion Protection: Painted protective coating on all metal surfaces for use in corrosive environments
• Complies with the Accessibility Guidelines for Buildings and Facilities, Section 4.13.11
• ANSI/BHMA: Meets A156.4, Grade 1. Meets A117.1.
• These door closers are certified by Corbin Russwin Architectural Hardware to comply with the above standards when properly installed and (if applicable) adjusted in parallel arm mountings.
• UL / ULC / UL10c: Listed for fire and cycle requirements.
• 16 Million Cycles Witnessed and verified by UL Finishes:

• 689 – Aluminum
• 690 – Dark Bronze