Descripción

Application:
-Single Acting, Handed
-Exterior or Interior Doors
-Weight to 350 lbs.
-Centering Arm
-Sizes up to 4’0″ x 8’6″* (1219 x 2591mm)

* For doors taller than 8’6″ use top pivot # 345 in lieu of 340

Product Description & Features:
• Select Extended spindles in 1/2″ increments up to 2″ longer than standard
• Centering arm with adjusting screws in face of door
• Built-in positive dead stop prevents door from swinging beyond the desired opening degree (105°)
• Separate and independent valves for closing speed, latch speed and backcheck
• Available non-hold open (NHO)
• Delayed action option – prefix “DA” (non-hold open closers only)
• ANSI/C06021
• Models available to meet ICC/ANSI A117.1 low opening force requirements, prefix “PH”. (For 8-1/2 lbs. of opening force prefix “PH” and suffix 8-1/2 lbs.)
• Sealed closer option – specify “SC”
• Available with floor plate or threshold installation (floor plate shown)
• Arm reinforcement bracket for wood doors – prefix W
• Cycolac, rustproof cement case
• Standard top pivot: #340 included
• Not allowed for fire rated doors
• Frame stop required on the header at the lock side. If not supplied by frame manufacturer, recommend use of 60131
• Furnished with wood and machine screws
• * For doors taller than 8’6″ use top pivot # 345 in lieu of 340